- Home
- »
- Our Products
- »
Brake Motor
Brake Motors Manufacturer from Pune.90 Watt Brake Motor
Product Details:
| Minimum Order Quantity | 1 Piece |
| Type | Break |
| Output Power | 0.75 hp, 1.5 hp, 1 hp, 0.5 hp |
| Phase | Single Phase |
| Motor Brand | J D Automation |
| Power | 90 W |
| Voltage | 120/240 V |
Owing to perfection and quality oriented approach, we have carved niche in the industry by offering an enormous grade array of 90 Watt Break Motor. The offered motor is manufactured using high grade material and ultra-modern techniques in adherence to set industry standards. It is widely used in number of industrial applications for power transmission work. Further, our quality controllers strictly check this motor on different quality parameters assuring its flawlessness at user’s end.
Features:
• Noiseless operation
• Precisely engineered
• Long service life
Callback
60 Watt Brake Motor
Product Details:
| Type | Break |
| Color | Matt black |
| Speed | 1500 |
| Motor Brand | J D Automation |
| Power | 60 W |
| Voltage | 120/240 V |
The JDA range of compact AC geared motors are ideal for a wide variety of applications due to their long life, aesthetic design, low noise and high efficiency. All of the motors use standard AC induction technology, and can be combined with a range of in-line helical gearboxes, to give a compact and very cost-effective geared motor solution.
In addition to the Standard Induction motors, JDA also offers a range of Quick Reversible models. These are ideally suited for Stop/Start or Forward/Reverse applications, due to their integrated friction braking system, which reduces over-run and stopping time (S2 duty).
All motors are supplied with a normally closed thermal switch integrated into the motor windings, for thermal protection purposes.
Callback
DC Brake Motor
Product Details:
| Frequency | 50 Hz / 60 Hz |
| Applications | Wire drawing machines,Rubber mixing mills,Rolling mills |
| Break Type | DC |
| Speed | 1 rpm to 300 |
| Phase | Three Phase |
| Motor Brand | J d automation |
| Power | 0.5 |
DC Brake Motors are used for various applications where instantaneous stopping of the driven load is required. The operation of the brake is “FAIL SAFE TYPE” and are NORMALLY ON. The brake is applied when power to the motor is switched off or power failure occurs.When there is no power given to either motor or Brake, the Brake toque is provided by compression springs developing an axial force on the Brake armature plate which ultimately presses it against mounting flange. In this condition a nominal air gap will be available and the rotor with the frictional surfaces remains sandwiched in between armature plate and mounting plate. Release of the brake takes place when the power to the Brake and motor is supplied at the same time. Power to the Brake coil produces strong magnetic field and pulls the armature plate against the compression spring force towards the stator (Brake Coil) over the air gap and rotor becomes free to rotate. The attraction of the armature plate and returning to its original position takes place instantaneously thus failsafe nature is ensured in case of power failure.
Applications:
Textile Machines
Material Handling Equipments
Conveyors
Machine Tools
Cranes & Hoists
Glass Manufacturing Machines
Geared Motors
Wire Drawing Machinery
Sluice Gates
Cable reeling drum
Navy Deck Machines
Leather Processing Machines
Steel rolling mills
Special Purpose Machines
Defence Equipments, Etc
Callback
180 W Electro Magnetic Brake Motor
Product Details:
| Minimum Order Quantity | 1 Unit |
| Type | Electro Magnetic |
| Output Power | 1 hp, 0.75 hp, 1.5 hp, 0.5 hp, >3 hp |
| Phase | Single Phase |
| Power | 180 W |
| Voltage | 190 V |
While climbing on the success ladder, it has become increasingly important for us to deliver precisely tested and high grade assortment of 180 W Electro Magnetic Brake Motor. The offered motor is manufactured using premium quality material and contemporary techniques in adherence to set industry standards. It is widely demanded in different industries for transmission of torque. Clients can avail this motor from us at pocket friendly price.
Features
- High efficiency
- Corrosion resistance
- Rugged construction
Callback
Additional Information:
- Pay Mode Terms: T/T (Bank Transfer)
25 Watt Brake Motor
Product Details:
| Minimum Order Quantity | 1 Number |
| Output Power | 0.75 hp, 1.5 hp, 0.5 hp |
| Brake Rating | <10 ft-lb, 50 ft-lb, 15 ft-lb, 35 ft-lb, <10 ft-lb |
| Voltage | 120 V, 115/208-230 V, 115 V, 120/240 V |
| Phase | Three Phase |
| Power | 25 W |
We are an acclaimed name engaged in offering our precious clients a superior quality range of 25 Watt Brake Motor. This motor uses standard AC induction technology to give a compact geared motor solution. Our offered motor is manufactured using high grade material and cutting-edge techniques in adherence to set industry standards. Further, it is strictly checked on different quality parameters before being dealt to our clients assuring its flawlessness at user’s end.
Features:
- Sturdy construction
- Heat resistance
- Unmatched quality
Callback
Additional Information:
- Pay Mode Terms: T/T (Bank Transfer)
60 Watt Horizontal Brake Motor
Product Details:
| Power | 60 W |
| Torque | 20N.m/200 kgfc |
| Frames | 90X90 mm |
| Phase | Single Phase |
| Voltage | 120/240 V |
The JDA range of compact 60 Watt Horizontal Brake Motor are ideal for a wide variety of applications due to their long life, aesthetic design, low noise and high efficiency. All of the motors use standard AC induction technology, and can be combined with a range of in-line helical gearboxes, to give a compact and very cost-effective geared motor solution.
In addition to the Standard Induction motors, JDA also offers a range of Quick Reversible models. These are ideally suited for Stop/Start or Forward/Reverse applications, due to their
integrated friction braking system, which reduces over-run and stopping time (S2 duty).
All motors are supplied with a normally closed thermal switch integrated into the motor windings, for thermal protection purposes.
Callback
40 Watt Brake Motor
Product Details:
| Frequency | 50 Hz |
| Output Power | 0.55-315 kW |
| Phase | Single Phase |
| Speed | less than 2000 RPM |
| Power | 40 W |
Consistent innovation, coupled with an alert understanding of customer's needs & demands, makes us the most renowned preparer and of optimum grade 40W Electro Magnetic Brake Motor. The 40 Watt Brake Motor is prepared with the help of optimum grade material and advanced techniques in adherence to set industry standards. It is widely used in different industrial applications for power transmission work. Further, the offered motor is made available in different specifications for our clients with different choices.
Features:
• Easy to install
• Sturdy construction
• Durability Product Detail:
• Electro Magnetic Brake
• 40W Standard Induction & Quick Reversible Motor
• Frame Size: 90x90 mm
• Continuous Rating Four Poles class E To A
Callback
90 W Brake Motor
Product Details:
| Type | Break |
| Output Power | 1.5 hp, >3 hp, 0.5 hp, 1 hp, 0.75 hp |
| Phase | Single Phase |
| Power | 90 W |
| Packing Type | Box |
The JDA range of compact AC geared motors are ideal for a wide variety of applications due to their long life, aesthetic design, low noise and high efficiency. All of the motors use standard AC induction technology, and can be combined with a range of in-line helical gearboxes, to give a compact and very cost-effective geared motor solution.
In addition to the Standard Induction motors, JDA also offers a range of Quick Reversible models. These are ideally suited for Stop/Start or Forward/Reverse applications, due to their integrated friction braking system, which reduces over-run and stopping time (S2 duty). All 90 W Brake Motor are supplied with a normally closed thermal switch integrated into the motor windings, for thermal protection purposes.
Callback