Helical Geared Motors

Product Details:

Main Features:
1. Quality aluminum alloy gear box, light weight and not rust
2. 2 optional worm wheel materials: C or aluminum bronze alloy
3. Standard parts and very flexible for shaft configurations and motor flange interface
4. Several optional mounting options
5. Low noise, High efficiency in heat dissipation
 
Product Application:
NMRV worm gearbox are widely used in the sectors, Like foodstuff, ceramics, and chemical manufacturing, as well as packing, printing, dyeing and plastics.
 

Product Details:

It has a different geometry as compared to a spur gear. In spur gear, the teeth are cut at 90 degrees. In case of helical, they are cut at a particular helix angle and sometimes they appear twisted. In the helical gear system, since the gear is cut at a helix angle, the contact starts at one point. It then covers the entire gear tooth as both the gears rotate. This is a major differentiating factor as compared to a spur gear. 

Features: 

• Better contact between gears as compared to spur gear.
• Low noise level of operation.
• Longer life than spur gears
• Case hardened gears and ground gears.

Additional Information:

• Production Capacity: 500
• Delivery Time: 30 DAYS
• Packaging Details: BOX

Product Details:

It has an alternate geometry when contrasted with a spike gear. In spike gear, the teeth are cut at 90 degrees. If there should be an occurrence of helical, they are cut at a specific helix edge and once in a while they seem curved. In the helical apparatus framework, since the rigging is cut at a helix edge, the contact begins at a certain point. It at that point covers the whole apparatus tooth as both the riggings pivot. This is a significant separating factor when contrasted with a spike gear. 
Highlights: 
Better contact between gears when contrasted with spike gear. 
Low clamor level of activity. 
Longer life than prod gears 
Callous riggings and ground gears.

Additional Information:

• Production Capacity: 500
• Delivery Time: 30DAYS
• Packaging Details: BOX

Product Details:

Inline Helical Gearbox offered are modular in construction & has been offered broadly in three categories viz as foot, flange & shaft mounting. Further the output shafts are available in splined male type as well as splined female type also. The prime mover ends are broadly categorized as solid shafts which can be connected by sprocket or pulleys or coupling otherwise hollow female type where in flange mounted electric motor or hydraulic motor can be directly inserted as male female joint.

Product Details:

Our extra-thin equal shaft helical gear motors are the ideal arrangement when space is restricted. The a wide range of sizes and plans guarantee that the gearmotors can be utilized in a wide assortment of uses much under the most horrible conditions.  shaft helical gearmotors are normally utilized in transport and materials handling applications.

You can browse foot-mounted, spine mounted or shaft-mounted alternatives. Decreased kickback equal shaft helical apparatus units are likewise accessible on demand for exact situating assignments

Product Details:

Technical Features

 

The high degree of modularity is a design feature of SRC helical gearboxes range. It can be connected respectively with motors such as normal motor, brake motor, explosion-proof motor, frequency conversion motor, servo motor, IEC motor and so on. This kind of product is widely used in drive fields such as textile, foodstuff, ceramics packing, logistics, plastics and so on. It is possible to set up the version required using flanges or feet.

 

 

 

Products characteristics

 

SRC series helical gear units has more than 4 types. Power 0.12-4kw; Ratio 3.66-54; Torque max 120-500Nm. It can be connected (foot or flange) discretionary and use multi-mounting positions according to customers requirements.

 

Ground-hardened helical gears;

 

Modularity, can be combined in many forms.

 

Aluminum casing, light weight.

 

Gears in carbonize hard, durable.

 

Universal mounting.

 

Refined design, space effective and low noise.

Additional Information:

• Production Capacity: 500
• Delivery Time: 30 DAYS
• Packaging Details: BOX PACK

Product Details:

R series Helical Gearbox/Geared Reducer

R series helical gearbox can stand higher radial load. R series helical gearbox is flange tails in the installation of the tail and the flange, and the speed reduction gears also have flanges and tails.

The characteristics of the R series Helical Gearbox

Small bias output, compact conformation, and making most use of the box space, the second and the third stage in the same box.
Integrally-cast box, good rigidity of the box, and easy to enhance the strength of the shaft and prolong the service life of the bearing.

Installation mode: base-installation, and there are big and small flanges to choose conveniently.

Solid-shaft output, the average efficiency of two-stage is 96% and 94% for three-stage and the overall average efficiency is 85%,The R series helical gearbox for agitation can stand greater axial force and radial force.

Product Details:

We are offering Reduction Gearbox to our clients.Technical Features

The high degree of modularity is a design feature of SRC helical gearboxes range.
It can be connected respectively with motors such as normal motor, brake motor, explosion-proof motor, frequency conversion motor, servo motor, IEC motor and so on.

This kind of product is widely used in drive fields such as textile, foodstuff, ceramics packing, logistics, plastics and so on.
It is possible to set up the version required using flanges or feet.

 

Products characteristics

SRC series helical gear units has more than 4 types. Power 0.12-4kw;
Ratio 3.66 to 54Torque max 120 to 500Nm.
It can be connected (foot or flange) discretionary and use multi-mounting positions according to customers requirements.

Ground-hardened helical gears;

Modularity,can be combined in many forms;

Aluminium casing, light weight;

Gears in carbonize hard, durable;

Universal mounting;

Refined design,space effective and low noise

Additional Information:

• Production Capacity: 500
• Delivery Time: 30days

Product Details:

It has a different geometry as compared to a spur gear. In spur gear, the teeth are cut at 90 degrees. In case of helical, they are cut at a particular helix angle and sometimes they appear twisted. In the helical gear system, since the gear is cut at a helix angle, the contact starts at one point. It then covers the entire gear tooth as both the gears rotate. This is a major differentiating factor as compared to a spur gear.

Features:

• Better contact between gears as compared to spur gear.
• Low noise level of operation.
• Longer life than spur gears
• Case hardened gears and ground gears.

Additional Information:

• Production Capacity: 500
• Delivery Time: 30 DAYS
• Packaging Details: BOX

Product Details:

Other Details:

• Metric in design
• Range of 12 size
• Wide choice of output speeds obtainable by use of appropriate input V-Belt drive.
• Delivers 98% efficiency per stage of reduction due to precision machined and ground helical gears.
• Direct mounting on drive shaft does away with bedplates, couplings and alignment problems normally encountered in foot mounted gearboxes.

Variants:

• Foot Mount / Flange Mount
• Motor Mounting
• Vertical Shaft Mounting
• Back stop